首页  编辑  

Tar文件格式

Tags: /超级猛料/Format.格式,单位/File.文件格式/   Date Created:

Tar 文件格式Java 2008-06-13 13:59:43 阅读266 评论0 字号:大中小 .

tar只是一个归档文件,并不进行压缩。

  struct tar_header

  {

   char name[100];

   char mode[8];

   char uid[8];

   char gid[8];

   char size[12];

   char mtime[12];

   char chksum[8];

   char typeflag;

   char linkname[100];

   char magic[6];

   char version[2];

   char uname[32];

   char gname[32];

   char devmajor[8];

   char devminor[8];

   char prefix[155];

   char padding[12];

  };

  

  以上是Tar中保存文件信息的数据结构,其后跟着的就是文件的内容。

  size为文件大小的八进制字节表示,例如文件大小为90个字节,那么这里就是八进制的90,即为132。

  其中,文件大小,修改时间,checksum都是存储的对应的八进制字符串,字符串最后一个字符为空格字符

  checksum的计算方法为出去checksum字段其他所有的512-8共504个字节的ascii码相加的值再加上256(checksum当作八个空格,即8*0x20)

  文件内容以512字节为一个block进行分割,最后一个block不足部分以0补齐

  两个文件的tar包首先存放第一个文件的tar头结构,然后存储文件内容,接着存储第二个文件的tar头结构,然后存储文件内容

  所有文件都存储完了以后,最后存放一个全零的tar结构

  所有的tar文件大小应该都是512的倍数,一个空文件打包后为512*3字节,包括一个tar结构头,一个全零的block存储文件内容,一个全零的tar结构

检测tar文件格式的方法:

1、检测magic字段,即在0x101处检查字符串,是否为ustar。有时某些压缩软件将这个字段设置为空。如果magic字段为空,进入第2步。

2、计算校验和,按照上面的方法计算校验和,如果校验和正确的话,那么这就是一个tar文件。

注意:在windows下面,不支持uid、uname等,有的甚至不支持magic,这样就比较麻烦了。

the unix tar program is an archiver program which stores files in a single

archive without compression.

offset              count type   description

@section the standard format

a @dfn{tar tape} or file contains a series of records.  each record

contains @code{recordsize} bytes.  although this format may be

thought of as being on magnetic tape, other media are often used.

each file archived is represented by a header record which describes

the file, followed by zero or more records which give the contents

of the file.  at the end of the archive file there may be a record

filled with binary zeros as an end-of-file marker.  a reasonable

system should write a record of zeros at the end, but must not

assume that such a record exists when reading an archive.

the records may be @dfn{blocked} for physical i/o operations.  each

block of @var{n} records (where @var{n} is set by the @samp{-b}

option to @code{tar}) is written with a single @code{write()}

operation.  on magnetic tapes, the result of such a write is a

single tape record.  when writing an archive, the last block of

records should be written at the full size, with records after the

zero record containing all zeroes.  when reading an archive, a

reasonable system should properly handle an archive whose last block

is shorter than the rest, or which contains garbage records after a

zero record.

the header record is defined in c as follows:

@example

/*

* standard archive format - standard tar - ustar

*/

#define  recordsize  512

#define  namsiz      100

#define  tunmlen      32

#define  tgnmlen      32

union record @{

   char        charptr[recordsize];

   struct header @{

       char    name[namsiz];

       char    mode[8];

       char    uid[8];

       char    gid[8];

       char    size[12];

       char    mtime[12];

       char    chksum[8];

       char    linkflag;

       char    linkname[namsiz];

       char    magic[8];

       char    uname[tunmlen];

       char    gname[tgnmlen];

       char    devmajor[8];

       char    devminor[8];

   @} header;

@};

/* the checksum field is filled with this while the checksum is computed. */

#define    chkblanks    "        "        /* 8 blanks, no null */

/* the magic field is filled with this if uname and gname are valid. */

#define    tmagic    "ustar  "        /* 7 chars and a null */

/* the magic field is filled with this if this is a gnu format dump entry */

#define    gnumagic  "gnutar "        /* 7 chars and a null */

/* the linkflag defines the type of file */

#define  lf_oldnormal '\0'       /* normal disk file, unix compatible */

#define  lf_normal    '0'        /* normal disk file */

#define  lf_link      '1'        /* link to previously dumped file */

#define  lf_symlink   '2'        /* symbolic link */

#define  lf_chr       '3'        /* character special file */

#define  lf_blk       '4'        /* block special file */

#define  lf_dir       '5'        /* directory */

#define  lf_fifo      '6'        /* fifo special file */

#define  lf_contig    '7'        /* contiguous file */

/* further link types may be defined later. */

/* bits used in the mode field - values in octal */

#define  tsuid    04000        /* set uid on execution */

#define  tsgid    02000        /* set gid on execution */

#define  tsvtx    01000        /* save text (sticky bit) */

/* file permissions */

#define  turead   00400        /* read by owner */

#define  tuwrite  00200        /* write by owner */

#define  tuexec   00100        /* execute/search by owner */

#define  tgread   00040        /* read by group */

#define  tgwrite  00020        /* write by group */

#define  tgexec   00010        /* execute/search by group */

#define  toread   00004        /* read by other */

#define  towrite  00002        /* write by other */

#define  toexec   00001        /* execute/search by other */

@end example

all characters in header records are represented by using 8-bit

characters in the local variant of ascii.  each field within the

structure is contiguous; that is, there is no padding used within

the structure.  each character on the archive medium is stored

contiguously.

bytes representing the contents of files (after the header record of

each file) are not translated in any way and are not constrained to

represent characters in any character set.  the @code{tar} format

does not distinguish text files from binary files, and no

translation of file contents is performed.

the @code{name}, @code{linkname}, @code{magic}, @code{uname}, and

@code{gname} are null-terminated character strings.  all other

fileds are zero-filled octal numbers in ascii.  each numeric field

of width @var{w} contains @var{w}@minus{} 2 digits, a space, and a null,

except @code{size}, and @code{mtime}, which do not contain the

trailing null.

the @code{name} field is the pathname of the file, with directory

names (if any) preceding the file name, separated by slashes.

the @code{mode} field provides nine bits specifying file permissions

and three bits to specify the set uid, set gid, and save text

(``stick'') modes.  values for these bits are defined above.  when

special permissions are required to create a file with a given mode,

and the user restoring files from the archive does not hold such

permissions, the mode bit(s) specifying those special permissions

are ignored.  modes which are not supported by the operating system

restoring files from the archive will be ignored.  unsupported modes

should be faked up when creating or updating an archive; e.g. the

group permission could be copied from the @code{other} permission.

the @code{uid} and @code{gid} fields are the numeric user and group

id of the file owners, respectively.  if the operating system does

not support numeric user or group ids, these fields should be

ignored.

the @code{size} field is the size of the file in bytes; linked files

are archived with this field specified as zero.

@xref{extraction options}; in particular the @samp{-g} option.@refill

the @code{mtime} field is the modification time of the file at the

time it was archived.  it is the ascii representation of the octal

value of the last time the file was modified, represented as an

integer number of seconds since january 1, 1970, 00:00 coordinated

universal time.

the @code{chksum} field is the ascii representation of the octal

value of the simple sum of all bytes in the header record.  each

8-bit byte in the header is added to an unsigned integer,

initialized to zero, the precision of which shall be no less than

seventeen bits.  when calculating the checksum, the @code{chksum}

field is treated as if it were all blanks.

the @code{typeflag} field specifies the type of file archived.  if a

particular implementation does not recognize or permit the specified

type, the file will be extracted as if it were a regular file.  as

this action occurs, @code{tar} issues a warning to the standard

error.

@table @code

@item lf_normal

@itemx lf_oldnormal

these represent a regular file.  in order to be compatible with

older versions of @code{tar}, a @code{typeflag} value of

@code{lf_oldnormal} should be silently recognized as a regular

file.  new archives should be created using @code{lf_normal}.  also,

for backward compatibility, @code{tar} treats a regular file whose

name ends with a slash as a directory.

@item lf_link

this represents a file linked to another file, of any type,

previously archived.  such files are identified in unix by each file

having the same device and inode number.  the linked-to

name is specified in the @code{linkname} field with a trailing null.

@item lf_symlink

this represents a symbolic link to another file.  the linked-to

name is specified in the @code{linkname} field with a trailing null.

@item lf_chr

@itemx lf_blk

these represent character special files and block special files

respectively.  in this case the @code{devmajor} and @code{devminor}

fields will contain the major and minor device numbers

respectively.  operating systems may map the device specifications

to their own local specification, or may ignore the entry.

@item lf_dir

this specifies a directory or sub-directory.  the directory name in

the @code{name} field should end with a slash.  on systems where

disk allocation is performed on a directory basis the @code{size}

field will contain the maximum number of bytes (which may be rounded

to the nearest disk block allocation unit) which the directory may

hold.  a @code{size} field of zero indicates no such limiting.

systems which do not support limiting in this manner should ignore

the @code{size} field.

@item lf_fifo

this specifies a fifo special file.  note that the archiving of a

fifo file archives the existence of this file and not its contents.

@item lf_contig

this specifies a contiguous file, which is the same as a normal

file except that, in operating systems which support it,

all its space is allocated contiguously on the disk.  operating

systems which do not allow contiguous allocation should silently treat

this type as a normal file.

@item 'a' @dots{}

@itemx 'z'

these are reserved for custom implementations.  some of these are

used in the gnu modified format, as described below.

@end table

other values are reserved for specification in future revisions of

the p1003 standard, and should not be used by any @code{tar} program.

the @code{magic} field indicates that this archive was output in the

p1003 archive format.  if this field contains @code{tmagic}, the

@code{uname} and @code{gname} fields will contain the ascii

representation of the owner and group of the file respectively.  if

found, the user and group id represented by these names will be used

rather than the values within the @code{uid} and @code{gid} fields.

@section gnu extensions to the archive format

the gnu format uses additional file types to describe new types of

files in an archive.  these are listed below.

@table @code

@item lf_dumpdir

@itemx 'd'

this represents a directory and a list of files created by the

@samp{-g} option.  the @code{size} field gives the total size of the

associated list of files.  each filename is preceded by either a @code{'y'}

(the file should be in this archive) or an @code{'n'} (the file is a

directory, or is not stored in the archive).  each filename is

terminated by a null.  there is an additional null after the last

filename.

@item lf_multivol

@itemx 'm'

this represents a file continued from another volume of a

multi-volume archive created with the @samp{-m} option.  the original

type of the file is not given here.  the @code{size} field gives the

maximum size of this piece of the file (assuming the volume does not

end before the file is written out).  the @code{offset} field gives

the offset from the beginning of the file where this part of the

file begins.  thus @code{size} plus @code{offset} should equal the

original size of the file.

@item lf_volhdr

@itemx 'v'

this file type is used to mark the volume header that was given with

the @samp{-v} option when the archive was created.  the @code{name}

field contains the @code{name} given after the @samp{-v} option.

the @code{size} field is zero.  only the first file in each volume

of an archive should have this type.

@end table

extension:

occurences:

programs:

reference:

see also:

validation:

offset              count type   description

0000h                 256 byte   other header info ?

0100h                   6 char   id='ustar',0

extension:tar

occurences:pc, unix

programs:tar